Introduction; Mangoh Red Components And Accessories - mangOH Red User Manual

1: Introduction

This user guide explains how to set up and begin using the mangOH™ Red with CF3 (Common Flexible Form
Factor) modules.
Once you have the mangOH Red set up, visit
code samples, and other materials.

1.1 mangOH Red Components and Accessories

Table 1-1 details the required and optional components needed to begin using the mangOH Red in your
development environment. Some of these components are available in mangOH Red development kits (kit
contents are supplier-dependent).
Table 1-1: mangOH Red Required and Optional Components
Item
(1) mangOH Red with
CF3 module
(Pre-installed in kit)
(2) CF3 module covers
and cover removal tool
(One pre-installed in kit)
(2) Micro-USB cables
(Included in kit)
(1 or 2) Antenna, Ultra
Wide Band
(Included in kit)
Rev 3 Sep.18
mangoh.io/mangoh-red-resources
Details
Pre-configured development board for CF3 modules
The module in the kit includes a cellular modem and an
application processor running Legato, an open source
embedded platform built on Linux for hosting IoT applications
(see legato.io for details).
For a list of Sierra Wireless CF3 modules and their
compatibility with mangOH Red, see
Note: Not all supported Sierra Wireless modules include appli-
cation processors.
Industrial-quality snap-in module covers (for 2.5 mm and
4.0 mm height modules) plus cover removal tool to disconnect
the cover from the mangOH Red
Note: The cover and tool shown are for WP-series modules. A
similar cover and tool (not displayed) are used for HL-series
modules.)
Connects computer to the mangOH Red for communication
and to provide power for non-transmitting tests.
Main RF antenna included. Second antenna included if CF3
module supports diversity.
6
for developer documentation,
Table 1-2 on page 7.
1
Example
41110400