Software Setup; Install / Update Windows Driver - mangOH Red User Manual

4: Software Setup

This chapter describes software resources that you will need on your computer to access the mangOH Red and
develop applications for its CF3 module.
Sample applications and instructional materials are available from the sites mentioned in this chapter. For detailed
information on developing for the mangOH Red, see the mangOH Red Developer's Guide and related documents
(available from mangoh.io/mangoh-red-resources).

4.17 Install / Update Windows Driver

If you are using a Windows computer, you must install the Legato driver for the CF3 module that you install in your
mangOH Red.
1. Go to mangoh.io/mangoh-red-resources-getting-started.
2. In the Getting Started with mangOH section, click Drivers for mangOH-compatible CF3 Modules (under the
Windows icon) to download the driver installation file.
Note: The link will take you to source.sierrawireless.com. If you already have a Source account, log in. Otherwise, register
for a Source account, which is required to download files.
3. Run the downloaded file (GenericDriverSetup.exe) and follow the prompts to install the drivers.
4. When the mangOH Red is connected via USB to the computer, display the Device Manager
(Control Panel > System > Device Manager).
Figure 4-1: Windows Device Manager
Rev 3 Sep.18 36
4
41110400