Sim, Sd, And Iot Expansion Cards; Inserting A Micro-Sim Card - mangOH Red User Manual

mangOH Red User Guide
2. Attach the main antenna, the GNSS antenna, and (for WP76xx modules) the diversity antenna.
Note: Press the antenna connector firmly to get a secure connection. Also, the female connectors (on the antenna) are
rated for a limited number of reconnects before the connector wears out, so should be left connected if possible. Use a
U.FL extraction tool to put less strain on the connector during removal.)
Diversity (CN302)
Figure 3-8: Antenna Connector Locations
Tip:
If you have trouble connecting an antenna, make sure it is positioned directly on the connector and push straight down.
The antenna will not connect at an angle.

3.7 SIM, SD, and IoT Expansion Cards

3.7.1 Inserting a micro-SIM Card

To establish a mobile network connection with a CF3 module, you must install a micro-SIM in the connector on the
bottom side of the mangOH Red. Use either of the following:
• SIM card with activated account (e.g. the Sierra Wireless or AT&T SIM provided with the kit, or another
carrier's activated card), or
• Test SIM card for use with a call box (for example, an Agilent 8960 or Rohde & Schwarz CMU200)
Rev 3 Sep.18
Main (CN301)
GNSS (CN303)
18 41110400