mangOH Red User Manual page 14

mangOH Red User Guide
3. Hold the module cover over the module and line up the circle on the cover with the triangle on the label, then
press down carefully on the cover (on the edges) until you hear the cover click into place. Make sure all sides
of the cover have clicked into place.
Figure 3-2: mangOH Red—Module Cover Attachment
To remove a CF3 module from the mangOH Red:
1. Remove the module cover using the module cover removal tool—Starting at one corner, insert the tool in the
pair of holes and carefully pry the cover away from the module.
2. Repeat at the other locations (pairs of pry holes are on each side).
Figure 3-3: mangOH Red—Module Removal
3. Lift the cover off the module.
4. Carefully lift the module straight up out of the socket.
Rev 3 Sep.18
Triangle on the label
matches position of
circle on the cover.
14 41110400