Aaeon HSB-525I User Manual page 11

H a l f - s i z e S B C

H/W Status Monitor

Battery

Power Requirement
Note: HSB-525I has to be operated with an ISA backplane.
Normally, onboard 4-pin power connector can supply power (+5V
and +12V) to operate the board. But the COM1 will need +5V and
±12V power supplied through the ISA bus.

Board Size

Gross Weight

Operating Temperature

Storage Temperature

Operating Humidity

EMI
Display

Chipset

Graphic Engine

Resolutions

Output Interface
H S B - 5 2 5 I
Monitoring system temperature,
voltage, and cooling fan status
Lithium battery
+5V, ±12V by ISA bus, onboard
4-pin power connector (+5V,
+12V)
7.3"(L) x 4.8" (W)
(185mm x 122mm)
0.71lb (0.3kg)
o o o
32 F~140 F(0
o o
-4 F~158 F(-20
10%~80%, non-condensing
CE/FCC Class A
®
Intel Atom™D525 + ICH8M
®
Intel Atom™D525 with
integrated Graphics Core
Up to 2048x1536 @ 60 Hz for
CRT; 1366x768 @ 60 Hz for
LCD
VGA x 1, LVDS x 1
Chapter 1 General Information
o
C~60 C)
o o
C~70 C)
1- 5