Download Print this page

WilTec HS-178 Instructions For Use page 2

Air eraser mini abrasive gun

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by means of fire or
electric shock we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Safety guideline
BEWARE:
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or you follow the instructions made by this person how to use
the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
Never spray on food or chemicals with this gun.
Never use wire or other hard objects to clean the nozzle or the needle; this may cause
damage.
Never dip the whole gun in a solvent like paint thinner because this could ruin the air cap, the
paint nozzle or the needle.
SAFETY GUIDELINES:
The user should choose the right compressor with the appropriate air volume and air pressure
to correspond to the actual work requirements.
Always wear goggles. Under no circumstances should you direct the airflow towards your
body or other persons' bodies.
When you start working make sure that all the screws are tight.
Specification
Type:
Diameter:
Storage tank capacity:
Uses:
The "Air Eraser" is a useful tool for removing colour defects or engraving surfaces. It is employed as a
hobby and professional tool for cleaning jewellery or very fine parts, for removing colour defects, glass
engraving. It is also used for lithographic work, for highlighting colour shades and correcting colour
errors without damaging or spreading the surface. It is widely used for model railways.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
HS178 – Mini Abrasive Gun
0,5mm
15 ml
Seite 2

Advertisement

loading

This manual is also suitable for:

34178