Table of Contents
Advertisement
D. Separator
• The front separator and rear separator are attached to the evaporator bracket with
different lengths of pins. The front separator pins (10.7 mm) are longer than the
rear separator pins (8.8 mm). Do not misplace the front and rear separators.
• Do not attach the separators upside down or inside out. Make sure that the side
printed with "THIS SIDE UP" faces up, and the side printed with "EVAPORATOR
SIDE" faces the evaporator.
1) Move the control switch to the "OFF" position, then unplug the appliance.
2) Remove the top panel, rear panel and side panels.
3) Remove the top cover and front cover. See Fig. 8.
Spray Tube
Front Separator
IMPORTANT
Top Cover
Silicone Hose
Pin
Front Cover
Rear Separator
44
Fig. 8
Hide quick links:
Advertisement
Table of Contents
