Table of Contents
Advertisement
1. Using an RXE management cable, connect one end of the cable to the RXE
2. Connect the opposite end of the cable to the RXE Management A (in) Port
RXE expansion cabling
There are two RXE Expansion Port connectors on the rear of the server. Use these
connectors to connect the server to a remote I/O enclosure and to expand the
number of PCI-X slots that are available for use by the server. For additional
information about cabling the RXE Expansion Port connectors, see the
documentation that comes with the remote I/O enclosure.
Complete the following steps to cable the server to a remote I/O enclosure with one
expansion kit installed.
RXE Expansion Port (A)
connector
RXE Management Port
connector
RXE Management A (in)
Port connector
RXE Expansion Port
connector
1. Using an RXE expansion cable, connect one end of the cable to the RXE
2. Connect the opposite end of the cable to an RXE Expansion Port connector on
24
xSeries 450: Installation Guide
Management Port connector on the server.
connector on the remote I/O enclosure.
Expansion Port (A) connector on the server.
the remote I/O enclosure.
xSeries 450
RXE-100
Advertisement
Table of Contents
