Table of Contents
Advertisement
7. Install the microprocessor and power module:
Microprocessor
Microprocessor
baffle
a. Remove the microprocessor baffle from the microprocessor socket. Keep
the microprocessor baffle for future use.
b. Remove the protective tape covering the microprocessor socket, if present.
Attention:
Inserting the microprocessor in a locked connector might
damage the pins and cause the microprocessor to fail.
c. Ensure that the socket lock is in the unlocked position to permit plugging in
the microprocessor. Use the hex wrench provided with the microprocessor
Power module
Chapter 2. Installing options
17
Advertisement
Table of Contents
