Table of Contents
Advertisement
5.1.3 Display Function U
Sets the units of measure that speed will be displayed in . Choose
"EUr" to display for meters-per-second (m/s) or "USA" to display
feet-per-second (f/s) .
5.1.4 Display Function A – Vertical Angle Display
Used to verify that the SVR™ is reading vertical angle correctly . The
vertical angle may be checked by pressing the Menu button until
the letter "A" is shown in the display and then pressing the SEL
button . As you move the gun up and down the angle that the gun
is currently at will be displayed . To exit the mode pull the trigger
switch or press the MENU, RCL or PWR buttons .
22
Figure 5.1.3
Units mode
Figure 5.1.4
Vertical Angle
Advertisement
Table of Contents
