Throttle Freeplay - Cub Cadet Challenger 500 Operator's Manual

Throttle Freeplay Inspection
1. Set the parking brake .
2. Apply the brakes. Start the engine. Allow it
to warm up thoroughly.
3. Measure the distance the throttle pedal
moves before the engine begins to pick up
speed. Freeplay should be 1/16 to 1/8
inches (1.5-3mm).
Throttle Freeplay Adjustment
1. Remove both seats. Remove the middle
cover of the engine. (see PAGE 8-9 )
2. Loosen the nut of throttle cable on the
valve,
3. Spin the throttle cable inside (A)/ outside (B)
to increase the throttle pedal's moving
distance to 1/16 to 1/8 inches (1.5-3mm).
Pre Operation Checks
1．Accelerator Cable column nut
4. Tighten the the nut.
5. Reinstall the center cover and seats to their
correct and locked positions.
Steering Wheel Inspection
Check the steering wheel for specified freeplay
and smooth operation.
1. Position the vehicle on level ground.
5-9