Control Functions - Cub Cadet Challenger 500 Operator's Manual

CONTROL FUNCTIONS

Combination switch
Light switch /
1. Light switch /
2. High beam switch
3. Low beam switch
4. Position lamp
5. Turning light switch
/ "
/ "
Control Functions
6. Emergency light button
● Set the switch to
beam。
● Set the switch to
beam。
● Set the switch to "OFF" to turn off all the
lights.。
● Set the switch to
light in F/R headlights and taillights
L/R turning light switch
Place the L/R turning switch, the related turn
signal flash, and a buzzer may ring.
Emergency light switch
Press down the emergency light switch. Four
turning lights flash, and a buzzer ring.
"，to turn on the low
"，to turn on the high
"，to turn on the little
4-1