Installing The Software - Motorola iM1000 User Manual

iM1000 -Data Modem

Installing the Software

The Installation software enables packet data service.
During installation, if you receive a message that you do not
have one or more of the required Windows components
installed, see "HARDWARE INSTALLATION" on page 4.
To install the packet data software:
1. Turn on your modem.
2. Turn on your computer and start Windows 95, Windows 98 or
Windows NT.
3. Insert the Installation CD-ROM in your CD-ROM drive.
4. Select "Start", then select "Run".
5. Type d:\setup (or substitute the correct drive letter).
6. Click "OK". The Setup progress window opens. After it closes, the
Welcome window opens.
Figure 14. Installation Welcome Window
7. Click "Next". The User Information window opens.
16
I M P O R T A N T