Connecting Microphone And Speaker - AOpen FM56 Manual

4.7 Connecting Microphone And Speaker

You could either use a handset connected to the fax/modem, or connect a microphone and a
speaker for voice recording and playback, or connect cable of Jumper 1 with sound card in your
PC (optional, refer to sound card user's guide). Also, you may enable the ring wake up function
by connecting the cable of Jumper 5 to motherboard. (the function is optional, see the PC user's
manual for more detail)
NOTE:
Any commercially available microphone is usable.
For the speaker, any 8 ohm speaker rated around 1Watt can
be driven directly by the audio output. An amplifier is
required if you need a higher output volume.
1. Connect the microphone to the mini-phone jack marked MIC.
2. Connect the speaker to the mini-phone jack marked SPK.
NOTE:
Take care of the pin setting and cable setting direction (JP1 and JP2) for your Fax/Modem
card, Sound card and Motherboard.