Table of Contents
Advertisement
4.3 Installing The PC Card Fax/Modem
The following instructions explain how to install the fax/modem into a PC computer. If you will be
installing the fax/modem into a different computer, refer to the manual that came with your
computer or contact your computer dealer for instructions.
1.
Turn off the computer. No power must be applied to your
computer when you install the internal fax/modem, or the
computer could be damaged.
2.
Make sure you can freely access the back of the personal
computer. Remove the computer cover.
3.
Select any available PCI slot into which you can
install the internal fax/modem.
4.
Unscrew and remove the slot cover.
5.
Hold the internal fax/modem above the slot you have selected, and carefully slide
the fax/modem into the slot, applying even pressure to both ends of the fax/modem.
Stop inserting the fax/modem when its gold-plated edge connector is aligned and fully
seated into the base of the computer.
6.
Connect the sound card cable with JP1 and the sound card.(Optional)
7.
Connect the wake up ring cable with JP2 and the mother board.(Optional)
8.
Use the screw that was holding the slot cover to secure the
fax/modem in the slot.
9.
Use the cover-mounting screws to secure the computer
cover. This completes the hardware installation of your
fax/modem.
Advertisement
Table of Contents
