Advertisement
First use
Product description
Please adjust the water hardness
level at first use
Follow the separate operating instructions!
Adjusting the water hardness
Before the water hardness can be set,the
display message
Set water hardness...
must
be acknowledged by pressing the
OK
button.
Ironing board
X-frame for the ironing board
Iron with the steam hose
Iron resting surface
Steam hose holder
Power cord
Handle
Storage compartment (lower)
Water container
for the power cord, the steamer*, the
Tower
Steamer*, non-stick soleplate,
Residual water container
and the holder for the power cord.
Storage compartment (upper)
Wheels
Use the arrow buttons or on the
for the iron and the steam hose
Release handle
control panel to set the water hardness level
holder.
to setup the steam ironing system.
in your household.
* Standard equipment for steam ironing system
B 3847. Available as optional accessory
Confirm your selection by pressing the
OK
button.
The steam ironing system is now set for the
specified water hardness.
Rotary dial for height adjustment and
Steam hose holders
Make sure that the correct water hardness
dismantling the appliance
level is set.
Control panel
An incorrect setting will invalidate all
Iron resting surface
Steam hose holder
warranty claims.
Steam connection
Iron with steam hose
Assembly
1. Assembly of the steam ironing system
1. Use one hand to pull the release mecha-
nism upwards.
This releases the locking mechanism of the
ironing board and the X-frame folds down.
The steam ironing system is now assembled.
This is its lowest working position of approx.
32¾" (83 cm) high.
On/Off button
Switches the steam ironing system
on or off.
2. Adjusting the height
2. Hold onto the release mechanism and gui-
Display
de the ironing board into a position of approx.
Displays messages and instructions-
45°.
The steam ironing system can be adjusted to suit your
for the user.
personal preference.
The ironing board remains in this position by
Arrow button
itself.
The key is illuminated if additional op-
tions are provided, or the display text
exceeds the specified length of a line.
Scrolls the selection down or reduces
values.
Arrow button
Is illuminated if additional options are
provided or the display text exceeds
3. Use both hands to pull the ironingboard
the specified length of a line. Scrolls
upwards into a horizontal position until this
the selection up or increases values.
audibly clicks into place on both sides of the
OK button
tower.
Acknowledges the selection or the
information in the display.
button
Do not push down on the ironing board while adjus-
This button opens the settings menu.
ting the height!
While in the settings menu, the langua-
ge and the level of the water hardness
When you have reached your desired working height,
can be adjusted or the descaling
release the rotary dial.
process can be started.
The rotary dial will spring back into the center position.
The ironing board will remain at the adjusted height.
Switching on
3. Connection
Switch on the steam ironing system
1. Open the (lower) storage com-
partment by swinging the lid
downwards.
Press the button on the control
panel of the tower to turn on the steam
2. Remove the power cord from
ironing system.
the (lower) compartment.
The button is illuminated and the Welco-
3.Insert the power plug into a sui-
me screen appears for several seconds in
table grounded outlet.
the display.
Then the message
be displayed. The steam ironing system
starts heating up. During the heatup pha-
4.Guide the power cord through
se, some steam may be discharged from
the groove in the cover.
the iron.
5. Close the (lower) storage
As soon as the steam ironing system is
compartment.
ready and steam is available, the message
Ready
will be displayed.
6. Open the lid of the stora-
Filling the water container
ge compartment (upper) on the
Use one of the rotary dials
tower.
If the water container is empty or not instal-
located on the side of the
led in the tower, the message
7. Take out the iron and the
tower handle. Turn the dial in
steam hoseholder.
fill the water container
is displayed.
the direction and hold the
Close the storage compartment
dial in position.
lid.
8. Plug the steam hose holder
At the same time, pull the
into one of the sockets provided.
handle on the tower upwards
9. Insert the plug into the steam
with the other hand or press
connection.
the handle down
Hold the water container by its handle.
Pull the handle down.
The water container is released from the
retainer.
Guide the steam hose on the rubberring into the
steam hose holder.
Pull the water container upwards and out.
Always place the iron on the restingsurface before you
start ironing and when you take a break from
iro-
ning. This prevents damaging or discoloration of the
ironing board cover.
Ironing
Set the ironing temperature
Use the temperature selector on the iron to set the ironing
temperature.
Open the twist lock at the rear of the wa-
ter container by turning the lock coun-
terclockwise. Remove the twist lock.
Use fresh tap water to fill the container.
When placing the water containerin the
PreHeating phase
horizontal position, the water container
will
can also be filled if the faucet is installed
very low.
Replace the twist lock in the opening of
the water container.
Close the twist lock by turning it clock-
wise as far as it will go.
Put the water container back into the
tower.
The water container can be removed and
refilled at any time (even during the ironing
Insert or re-
process).
When selecting the temperature levels Silk/Wool (medium temperature) and Linen/Cot-
Never attempt to use solely distilled water
ton (high temperature) you can use steam when ironing.
to fill the water container. This can cause
the steam ironing system to malfunction.
Do not use water from a water softener
Switching off
system.
Do not use condensate (e.g. from other
To switch off the steam system, press the button on the control panel.
appliances such as air conditioning units,
The illuminated button goes out.
dryers).
Never use rainwater.
Do not use additives, (e.g. perfumes, iro-
If you want to put the ironing system away:
ning water, starch, carbon dioxide).
Unplug the power cord from the outlet.
Store the power cord in the (lower) compartment or hang it up
on the cord clip.
Dismantling
Dismantling
The ironing board is now unlocked.
Release the rotary dial.
To dismantle the steam ironing system, the
The rotary dial will spring back into the
ironing board must first be placed at its
center position.
lowest working height.
Guide the ironing board downwards or
Turn one of the rotary dials on the side of
allow it to slide down by itself.
the tower handle as far as it will go in the
direction.
The ironing board will remain in this
position by itself.
Hold the rotary dial in the position.
The height of the ironing board can now be
adjusted.
Push the ironing board up by the tape-
Keep holding the rotary dial in the
red end until it is upright and locks into
position and, simultaneously, use the
position on the tower.
handle of the tower to push the ironing
board down as far as possible.
Never push on the ironing board to push it
down.
Release the rotary dial.
The rotary dial will spring back into the
center position.
Push the protruding end of the
X-frame onto the ironing board until
the frame locks into place.
Turn one of the two rotary dials to the
position as far as it will go.
FashionMaster 4216
en - US, CA
M.-Nr. 10 462 480 / 01
Advertisement
