Inserting The Battery Pack; Charging The Battery Pack - Sony CMD-Z5 User Manual

Inserting the Battery Pack

1
Unwrap the battery pack.
2
Press the battery pack firmly into place
and check that it snaps closed.
To remove the battery pack
First turn the power off and wait until the display goes blank. Press the
battery release hook down and remove the battery.
Warning
• If the battery is removed from the phone at constant temperature for approx. 3
days, the clock will be reset.
• Do not remove the battery pack from the phone when the power is on. Doing so
may cause settings or data to be deleted or changed.

Charging the Battery Pack

As supplied, your battery pack will not be fully charged.
You can select one of the following three ways to charge the battery pack:
1 Directly connect the phone to the AC
adaptor.
2 Use the desktop holder to charge the
battery pack:
To mains
To mains
GB
13