Advertisement
e. Remove the IAT from the air box.
3. Installation of AEM
a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
b. Ensure the inside of the AEM inlet pipe and air filter are clean and free from any foreign objects and/or
obstructions.
c. Install the intake pipe using the provided coupler
and hose clamps. Also install the rubber grommet
on the air filter side of the intake pipe.
®
intake system.
f. Remove the bracket that held the factory inlet tube.
d. Attach the breather hose to the intake pipe
nipple.
4
Advertisement
