Safety Recommendations; Cautions And Regulatory Compliance Statements For Nebs - Cisco Catalyst 9800-80 Installation Manual

Preparing Your Site for Installation
Before you install, configure, or perform maintenance on the controller, review the documentation for the
procedure you are about to perform, paying special attention to the safety warnings.
Note
Do not unpack the system until you are ready to install it. Keep the chassis in the shipping container to prevent
accidental damage until you determine an installation site. Use the appropriate unpacking documentation
included with the system.
Read the installation instructions in this document before you connect the system to its power source. Failure
to read and follow these guidelines could lead to an unsuccessful installation and possibly damage the system
and components.

Safety Recommendations

The following guidelines will help to ensure your own safety and protect your Cisco equipment. This list does
not cover all potentially hazardous situations, so be alert.
• Cisco safety policy mandates that all its controllers must conform to the requirements of IEC 60950,
• Review the safety warnings listed in Regulatory Compliance and Safety Information - Cisco Catalyst
• Never attempt to lift an object that might be too heavy for you to lift by yourself.
• Always turn all power supplies off and unplug all power cables before opening the chassis.
• Always unplug the power cable before installing or removing a chassis.
• Keep the chassis area clear and dust free during and after installation.
• Keep tools and chassis components away from walk areas.
• Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught in
• The controller operates safely when it is used in accordance with its marked electrical ratings and

Cautions and Regulatory Compliance Statements for NEBS

The following table lists cautions, regulatory compliance statements, and requirements for the Network
Equipment Building System (NEBS) certification from the Telcordia Electromagnetic Compatibility and
Electrical Safety – Generic Criteria for Network Telecommunications Equipment (A Module of LSSGR,
FR-64; TSGR, FR-440; and NEBSFR, FR-2063) Telcordia Technologies Generic Requirements,
GR-1089-CORE.
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
with appropriate national deviations, as a minimum. In addition, Cisco controllers must also meet the
requirements of any other normative documents, for example, standards, technical specifications, laws
or regulations.
9800-80 Wireless Controller (available online at cisco.com) before installing, configuring, or maintaining
the controller.
the chassis. Fasten your tie or scarf and sleeves.
product-usage instructions.
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
Safety Recommendations
19