Mounting The Controller In The Rack - Cisco Catalyst 9800-80 Installation Manual

Mounting the Controller in the Rack

1 Front rack-mount bracket ear and holes
2 Front rack-mount bracket
Step 2 Position the front rack-mount bracket top hole with the chassis, first top hole behind the side vent holes.
Step 3
Insert and tighten the black screws on one side.
Step 4 Repeat Step 1 to Step 3 on the other side of the chassis. Use black screws to secure the rack-mount brackets to the chassis.
Mounting the Controller in the Rack
After installing the rack-mount brackets on the chassis, mount the chassis by securing the rack-mount brackets
to two posts or mounting strips in the rack using the screws provided. Because the rack-mount brackets support
the weight of the entire chassis, ensure that you use all the screws to fasten the two rack-mount brackets to
the rack posts.
Cisco Catalyst 9800-80 Wireless Controller Hardware Installation Guide
44
3 Front rack-mount bracket screws
Installing the Controller