Devolo dLAN pro 1200+ triple Manual page 22

dLAN pro network 21
Expanding an existing dLAN pro network by
adding another dLAN pro device
If you have already secured your existing dLAN pro
network using the encryption button, use the same
method to integrate further devices. Once you have
successfully connected the new dLAN pro device, first
press the encryption button (> one second) of one of
your network's existing devices, then press the
encryption button (> one second) of your new dLAN
pro device within two minutes.
That's it! The new dLAN pro device is now integrated
in your network. To integrate additional dLAN pro de-
vices in your network, repeat the above steps.
Removing a dLAN pro device from a network
To remove a dLAN pro 1200+ triple or another dLAN
pro device from an existing network, press its encryp-
tion button for at least ten seconds. The device will be
assigned a new randomly generated password and will
thus no longer be able to access the network. To inte-
grate the device into a different dLAN pro network, fol-
low the steps described above, depending on whether
you are setting up a new network or adding the device
to an existing one.
devolo dLAN pro 1200+ triple