D-Fi Usb Connectivity; Configuration (D-Fi Usb); Dip Switch Channels - Chauvet DJ 4BAR USB User Manual

D-Fi USB Connectivity

The 4BAR USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
Chauvet DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then
set the product's DMX Personality and DMX Address. Further instructions for connecting this product for
D-Fi USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual display
control/menu buttons and IRC-6 will be unavailable until you unplug the D-Fi USB. The
priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons

Configuration (D-Fi USB)

1. Set the DMX Personality and DMX address on your product.
2. Use the Chart provided to set BOTH:
• The Channel, and then
• the Receiving or Transmitting option.
D-Fi USB DIP Switch Channels
1 2
Page 8 of 19
3 4 T/R 1 2 3 4 T/R
4BAR USB User Manual Rev. 1
Operation