Wedge Mode Profile - Honeywell Dolphin CT50 User Manual

Hide thumbs Also See for Dolphin CT50:

Table of Contents

Profile Settings and Descriptions

Settings

HON:Reset

HON:EnablePreviewOnD

ecode

HON:EnablePreviewOnD

ecodeAttempt

HON:DisablePreview

HON:EnableOOBE

HON:ScanButtonEnable

HON:ScanButtonDisable

Wedge Mode Profile

Wedge mode enables a default list of symbologies (for example, UPCA, Code 39,

Code 128, GS1128, Aztec, Data Matrix, Maxicode, Pdf417 and QR code). You can

enable or disable Symbologies for wedge mode using a profile named HONWedge.

Profile commands customize scan wedge mode behaviors. Customers set wedge

mode configuration commands using an .exm file. To learn more about customized

profiles, see the next section

You can use the following HONWedge profile commands to modify the scan

wedge.

Descriptions

Resets all symbology settings to disabled.

Profile not supported in ScanDemoW10.

The default profile. Disables sending images to the application.

Only decode results are shown on the screen.

Enables the symbology types required when the built-in Out-of-

box plug-in runs at first boot for scanning EZConfig labels. This

profile allows you to scan a prov.xml file to set up the CT50. You

cannot modify this profile.

Enables the Scan button.

Disables the scan button.

Create a Custom Profile,

Dolphin CT50 with Windows 10 IoT User Guide

beginning on page 29.

Table of Contents