Charger Location - Napa 85-716 Instruction Manual

Professional racing battery charger fully automatic for 16v agm batteries
Table of Contents

Advertisement

Available languages

Available languages

4.3
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in a risk of fire and electric shock.
If an extension cord must be used, make sure:
a. That the pins on the plug of extension cord are the same number, size,
and shape as those of the plug on charger;
b. That the extension cord is properly wired and in good electrical
condition;
c. That the wire size is large enough for AC ampere rating of the charger
as specified in the following table.
Recommended minimum AWG size for extension cords
AC Input rating, Amps
Equal to or
greater than
0
2
4
6
8
0
2
5.

CHARGER LOCATION

5.
Locate the charger as far away from the battery as the charger cables
permit.
5.2
Never place the charger directly above the battery being charged; gases
from the battery will corrode and damage charger.
5.3
Never allow the electrolyte to drip on the charger when taking gravity
readings or filling a battery.
5.4
Operate the charger only in well ventilated area, free of dangerous vapors.
5.5
Store the charger in a safe, dry location and maintain it in perfect condition.
5.6
Do not set the battery on top of charger or where acid might drip onto
charger.
for battery chargers
But less than
2
4
6
8
0
2
4
AWG size of cord
Length of cord, feet (m)
25
50
(7.6)
(5.2) (30.5) (45.6)
8
8
8
6
6
4
6
2
4
2
4
2
4
0
5
00
50
6
6
2
0
0
8
0
8
8
6
8
6
8
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents