Specification Guidelines For Service Use - Bang & Olufsen BeoLab 9 6217 Service Manual

Specification guidelines for service use

Type number
Dimensions W x H x D
Dimensions W x H x D, incl. packaging two pcs. in one carton box
Weight
Weight, incl. packaging
Cabinet finish
Mains
Power consumption
Power amplifier, bass
Power amplifier, midrange
Power amplifier, treble
Effective Frequency range
Crossover frequency
Cabinet principle
Net volume, bass
Net volume, midrange
Woofer
Midrange
Tweeter
Bass equalization
Input sensitivity (Power Link) and (line)
Switch off time (line)
Indication
Operation
Protection
Connections
Power Link
POWER LINK
Line-in
Mains
Subject to change without notice
Specification guidelines for service use
BeoLab 9
627
775mm x 400mm x 300mm
004mm x 800mm x 600mm
6.6 kg
44.9 kg
Black cloth, aluminium
Blue cloth, aluminium
Dark grey cloth, aluminium
Red cloth, aluminium
90-240Vac
65W (IEC60065)
25W typical
< 0,5W in standby
400W, 4 ohm, class D ICEpower
00W, 6 ohm, class AB
00W, 8 ohm, class AB
30 - 20,000 Hz
80/2000 Hz
Closed box
8 litres
4 litres
0" / 250mm cone
5" / 25mm cone
3/4" / 9mm dome in acoustic lens
ABL (Adaptive Bass Linearization)
25mV @ 9dB SPL
Automatic on /off (up to 3min)
On/Off LED placed in the acoustic lens
Switch for Free standing - Against wall - In corner
Switch for Left - Right - Line (via PL plug)
Thermal protection of all drivers
ABL system protects the bass unit against mechanical damage
Two (use semi-balanced PL cable type MKIII, or fully mounted PL cable)
Pin  PL ON => 2.5V, OFF = < 0.5V
Pin 2 Signal GND
Pin 3 Audio L out 0V - 6.5V RMS
Pin 4 PL speaker ON => 2.5V, OFF = < 0.5V
Pin 5 Audio R out 0V - 6.5V RMS
Pin 6 Data: High > 3.5V, Low < 0.8V
Pin 7 Data GND
Pin 8 Not used
Via PL using Line-to-PL adaptor cable
One (two pin male shaver plug type)
5.