Summary of Contents for Bang & Olufsen BeoLab 2000
Page 1
B E O L A B 2 0 0 0 The BeoLab 2000 gives your main Bang & Olufsen system an extra dimension. Now you can play any audio or video source you like in your main system and listen to it – via your BeoLink installation –...
BeoLab 2000 ready for use. Note: The BeoLab 2000 is designed to be used in a Bang & Olufsen BeoLink system (ML) only. Please contact your Bang & Olufsen dealer for further information.
Page 4
N I C E K N O W A B O U T … The BeoLab 2000 gives your main Bang & Olufsen system an extra dimension: • Now you can listen to any source you like from your main system (audio or video) in the room with your BeoLab 2000.
Page 5
• Step through radio or TV programs, or tracks on a tape or a CD. • Adjust the volume level in the two BeoLab 2000 loudspeakers – quite independently of your main system. • Include the BeoLab 2000 in a Timer Play programming of your main system.
If you press PLAY • again briefly, the BeoLab 2000 switches off. Note: If you press the PLAY • button for two seconds or more, both the BeoLab 2000 and your main system will switch off. * Note: If your main Bang & Olufsen system consists of a video system only (with no audio sources), pressing PLAY •...
• If you try to switch on a source in your main Bang & Olufsen system, and you get the sound from a different source (or no sound at all) in your BeoLab 2000 speakers, it may be because a recording is progressing in your main system. This special “lock” function ensures that the recording will not be spoiled.
Bang & Olufsen system (audio/video), and control the daily playback functions for that source in the room with your BeoLab 2000. Operation is then carried out just as if you were operating your main system directly, using the Beo4 remote control.
Page 9
BeoLab 2000 and your main Bang & Olufsen system. Note: The functions mentioned in this guide are only available from the BeoLab 2000 in so far as the source in question is included in your main Bang & Olufsen system – and provided the source supports the function.
Page 10
• To switch on a DVD or CDV player connected to your main video system, press DVD on Beo4. • If you use your BeoLab 2000 in the same room as your main Bang & Olufsen system, you must program the BeoLab 2000 accordingly (see how in the Setting-up guide).
Page 11
When you have adjusted the volume level in the BeoLab 2000 speakers, the Beo4 remote control enables you to preset the level in the BeoLab 2000 so that it always switches on at that level. All you have to do, to turn your adjustment into a permanent setting, is find the cues A.SETUP* and then...
Page 12
Contact person Dealer Telephone Address Record your serial numbers here: BeoLab 2000 Beo4 remote control Dear Customer, Your needs as the user of our products are always given careful consideration during the design and development process, and we strive to make our products easy and comfortable to operate.