Timer Function - LG FFH-185MVA Owner's Manual

PAGE 12 BEFORE OPERATION

Timer Function

With the TIMER function you can have the radio
reception and recording, CD play, tape play and turned
on and off at the time desired.
VOLUME
1
Press CLOCK to check the current time.
2
Press " TIMER" to enter the timer setting
mode.
(If you want to correct the previous memorized
TIMER, press and hold the "
more than 2 seconds.)
The previous memorized timer on time and the
" " appears in the display. Each function :
TUNER-CD-TAPE flashes in the display window
in turn.
3
Press SET when the desired function is
flashing.
4 1. a. When you select the TUNER function,
'PLAY' and 'REC' indicator flash in
the display window alternately for
about 3 seconds.
'PLAY' indicator : TUNER play only
'REC' indicator : TUNER play and
recording
b. Select the previous memorized preset
number with PRESET (-/+) buttons on
the front panel and press SET.
- 'ON TIME' indicator appears for about
0.5 seconds in the display window and
then disappears.
2. When you select the CD or TAPE function,
- 'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
Set the hour to switch on by pressing
5
PRESET (-/+) button.
Press SET to confirm the hour to switch on.
6
Set the minute to switch on by pressing
7
PRESET (-/+) button.
Press SET to confirm the minute to switch on.
8
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
PRESET (-/+)
disappears .
TIMER
Set the hour to switch off by pressing
9
CLOCK
PRESET (-/+) button.
SET
Press SET to confirm the hour to switch off.
10
Set the minute to switch off by pressing PRE-
11
SET (-/+) button.
Press SET.
12
Adjust the volume level by pressing
13
PRESET (-/+) button.
Press SET.
14
" " appears in the display window and the timer
TIMER" button
setting has been completed.
Switch the system off.
15
The selected function is automatically switched
on and off at the time set.
To cancel or check the timer
Each time the
select the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the
button so that " " appears in the display window.
To cancel the TIMER, press the
" " disappears in the display window.
Note
The unit can also set the clock function in STAND BY
state.
TIMER button is pressed you can
TIMER
TIMER button so that