Operation; Setting The Clock / Timer Function - LG LX-U150D Owner's Manual

Operation

Setting the Clock
1.
Press CLOCK.
(If the clock requires setting, press and hold
CLOCK for more than 2 seconds.)
- The hours begin to flash.
2.
Select a 12 hour cycle or 24 hour cycle by
pressing TUNING (+/-) on the front panel.
or
(12HR)
3.
Press SET to confirm the selected hour cycle.
4.
Use TUNING (+/-) buttons to set the
correct hours on the front panel.
5.
Press SET.
6.
Use TUNING (+/-) buttons to set the
correct minutes on the front panel.
7.
Press SET and the correct time is shown on
the display.
8.
Press CLOCK at any time to display the time
for about 3 seconds.
ote
The unit can also set the clock function in power
off state.
Timer Function
With the TIMER function you can have the radio
MP3 player(via USB connection,and CD player
turned on and off at the desired time.
1.
Press CLOCK to check the current time.
For your reference
If the clock is not set,timer will not operate.
2.
Press TIMER to enter the time setting mode.
TUNER /CD /USB flashes in the display window
in turn.
For your reference
If you want to correct the previous memorized
TIMER setting, press and hold the TIMER button
for more than 2 seconds.
- The previous memorized timer on time and
"TIMER" indicators appear on the display.
3.
Press SET when the desired function is flashing.
4.
1.When you select the TUNER function,select
the previous memorized preset number with
TUNING (+/-) on the front panel and press
SET.
- "ON TIME" indicator appears for about 0.5
seconds in the display window and then disap-
pears.
2.When you select the CD/USB function,
- "ON TIME" indicator appears for about
0.5seconds in the display window and then
disappears.
(24HR)
5.
Set the hour to switch on by pressing
TUNING (+/-) buttons on the front panel.
6.
Press SET to confirm the hour to switch on.
7.
Set the minute to switch on by pressing
TUNING (+/-) buttons on the front panel.
8.
Press SET to confirm the minute to switch on.
- "OFF TIME" indicator appears for about
0.5seconds in the display window and then
disappears.
9.
Set the hour to switch off by pressing TUNING
(+/-) buttons on the front panel.
10.
Press SET to confirm the hour to switch off.
.
11
Set the minute to switch off by pressing
TUNING (+/-) buttons on the front panel.
12.
Press SET.
13.
Adjust the volume level by pressing
TUNING (+/-) buttons on the front panel.
.
14
Press SET.
"TIMER" appears in the display window and
the time setting has been completed.
15.
Switch the system off.
The selected function is automatically switched
on and off at the time set.
To cancel or check the timer
Each time the TIMER button is pressed you can
select the time set or cancel. You can also check
the time setting status.
To activate or check the time, press the TIMER
button so that "TIMER" appears in the display
window.
To cancel the TIMER, press the TIMER button so
that "TIMER" disappears in the display window.
ote
You can also set the clock when the Hi-Fi is on
standby
7