Setting The Clock; Sleep Timer Function; Timer Function - LG FA-162 Owner's Manual

Setting the Clock

1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour
time system by tapping ./>.
v v v v v v
(12HR)
3. Press SET to confirm the selected hour time
system.
4. Tap ./> on the front panel to set the
correct hours.
5. Press SET.
6. Tap ./> on the front panel to set the
correct minutes.
7. Press SET and the correct time is shown on
the display window.
8. Press CLOCK at any time to display the
time for about 5 seconds.
Note:
If you want to reset the clock, press and hold
CLOCK for more than 2 seconds.

Timer Function

With the TIMER function, you can have the radio
reception, CD play and USB play turned on and
off at the desired time.
1. Press CLOCK to check the current time.
(If you don't set clock, the timer function
doesn't work.)
2. Press TIMER to enter the timer setting
mode. If you want to correct the previous
memorized TIMER setting, press and hold
the TIMER for more than 2 seconds.
- The previously memorized timer on the
time and " " indicator appears in the dis-
play window.
3. Each function (TUNER → CD → USB)
flashes in the display window in turn. Press
SET when the desired function is flashing.
4. a. When you select the TUNER function,
select the previously memorized preset
number by tapping ./ > on the front
panel and press SET.
- "ON TIME" indicator appears for about
0.5 seconds in the display window and
then disappears.
b. When you select the CD or USB function,
- "ON TIME" indicator appears for about
0.5 seconds in the display window and
then disappears.
8
or
(24HR)
10. Press SET.
12. Press SET.
13. Adjust the volume level by tapping ./>
14. Press SET.
15. Switch the system off.
To cancel or check the timer
Each time the TIMER is pressed you can select
the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the TIMER
that " " appears in the display window.
To cancel the TIMER, press the TIMER that " "
disappears in the display window.

Sleep Timer Function

When the sleep timer is used, the power is auto-
matically turned off after the specified time has
elapsed.
Note:
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you have to stop the function, press the
SLEEP repeatedly until "SLEEP 10" appears,
and then press SLEEP once again while "SLEEP
10" is displayed.
5. Set the hour to switch on by tapping
./> on the front panel.
6. Press SET.
7. Set the minute to switch on by tapping
./> on the front panel.
8. Press SET.
- "OFF TIME" indicator appears for about
0.5 seconds in the display window and
then disappears.
9. Set the hour to switch off by tapping
./> on the front panel.
11. Set the minute to switch off by tapping
./> on the front panel.
on the front panel.
" " appears in the display window and the
timer setting has been completed.
The selected function is automatically
switched on and off at the time set.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time
appears in the display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 → 150 → 120 → 90 → 80
→ 70 → 60 → 50 → 40 → 30 → 20 → 10
→ OFF (No display)