Timer Function / Sleep Timer Function - LG MCD202 Owner's Manual

Timer Function
With the TIMER function you can have the radio
reception, CD play, TAPE play and USB (in the
USB supplied models) play turned on and off at
the desired time.
1. Press CLOCK to check the current time.
(If you don't set clock, the timer function
doesn't work.)
2. Press TIMER to enter the timer setting
mode.
If you want to correct the previously
memorized TIMER setting, press and hold
the TIMER for more than 2 seconds.
- The previous memorized time and " "
indicator appear in the display window.
3. Each function [TUNER → CD → USB (in the
USB supplied models) → TAPE] flashes in
the display window in turn. Press SET when
the desired function is flashing.
4. a. 1) When you select the TUNER function,
'PLAY' and 'REC' indicator flash in the
display window alternately for about 3
seconds.
'PLAY' indicator : TUNER play only
'REC' indicator : TUNER play and
2) Press SET when the desired function
is flashing.
3) Select the previous memorized preset
number with .bb/BB> and
press SET.
b. When you select the CD, TAPE or USB (in
the USB supplied models) function,
- 'ON TIME' indicator appears for about
0.5 seconds in the display window and
then disappears.
5. Set the hour to switch on by pressing
.bb/BB> on the front panel.
6. Press SET.
7. Set the minute to switch on by pressing
.bb/BB> on the front panel.
8. Press SET to confirm the minute to switch on.
- 'OFF TIME' indicator appears for about
0.5 seconds in the display window and
then disappears.
9. Set the hour to switch off by pressing
.bb/BB> on the front panel.
10. Press SET.
11. Set the minute to switch off by pressing
.bb/BB> on the front panel.
To cancel or check the timer
Each time TIMER is pressed, you can select the
timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press TIMER so
that " " appears in the display window.
To cancel the TIMER, press TIMER so that " "
disappears in the display window.
Sleep Timer Function
When the sleep timer is used, the power is
automatically turned off after the specified time
has elapsed.
recording
Note:
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you have to stop the function, press the
SLEEP repeatedly until "SLEEP 10" appears,
and then press SLEEP once again while "SLEEP
10" is displayed.
12. Press SET.
13. Adjust the volume level by pressing
.bb/BB> on the front panel.
14. Press SET.
" " appears in the display window and the
timer setting has been completed.
.
15 Switch the system off.
The selected function is automatically
switched on and off at the time set.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appear
in the display window.
2. Each time you press SLEEP, the setting
changes in the following order.
SLEEP 180 → 150 → 120 → 90 → 80
→ 70 → 60 → 50 → 40 → 30 → 20 → 10
→ OFF (No display) → SLEEP 180 ...
9