Operation; Setting The Clock / Timer Function - LG LX-U561 Owner's Manual

Operation

Setting the Clock
1.
Press CLOCK.
(If the clock requires setting, press and hold
CLOCK for more than 2 seconds.)
- The hours begin to flash.
2.
Select a 12 hour cycle or 24 hour cycle by
pressing PRESET (-/+) on the front panel.
or
(12HR)
3.
Press SET/ CD( [] ) to confirm the selected hour
cycle.
4.
Use PRESET (-/+) buttons to set the
correct hours on the front panel.
5.
Press SET/ CD( [] ).
6.
Use PRESET (-/+) buttons to set the
correct minutes on the front panel.
7.
Press SET/ CD( [] ) and the correct time is
shown on the display.
8.
Press CLOCK at any time to display the time
for about 5 seconds.
ote
The unit can also set the clock function in power
off state.
Timer Function
With the TIMER function you can have the radio
reception and recording, CD play,USB, Tape play
turned on and off at the desired time.
1.
Press CLOCK to check the current time.
(If you don't set clock, timer function doesn't
work.)
2.
Press TIMER to enter the timer setting mode.
(If you want to correct the previous memorized
TIMER setting, press and hold the TIMER but-
ton more than 2 seconds.)
- The previous memorized timer on time and
" " indicators appear in the display.
3.
Each function [TUNERtCDtTAPEtUSB]
flashes in the display window in turn. Press
SET/CD( [] ) when the desired function is flash-
ing.
4.
1.a. When you select the TUNER function,
b. Press SET/CD( [] ) when the desired function
c. Select the previous memorized preset
"ON TIME" indicator appears for about 0.5 sec-
(24HR)
onds in the display window and then disap-
pears.
2. When you select the CD, TAPE or USB,
- "ON TIME" indicator appears for about
0.5 seconds in the display window and then
disappears.
5.
Set the hour to switch on by pressing
PRESET (-/+).
6.
Press SET/CD( [] ) to confirm the hour to switch on.
7.
Set the minute to switch on by pressing
PRESET (-/+).
8.
Press SET/CD( [] ) to confirm the minute to switch on.
- "OFF TIME" indicator appears for about 0.5
9.
Set the hour to switch off by pressing
PRESET (-/+).
10.
Press SET/CD( [] ) to confirm the hour to switch
off.
11.
Set the minute to switch off by pressing
PRESET (-/+) and then Press SET/CD( [] ).
12.
Adjust the volume level by pressing
PRESET (-/+).
13.
Press SET/CD( [] )
" " appears in the display window and the
timer setting has been completed.
14.
Switch the system off.
The selected function is automatically switched
on and off at the time set.
To cancel or check the timer
Each time the TIMER button is pressed you can
select the timer set or cancel. You can also check
the timer setting status.
To activate or check the timer, press the TIMER
button so that " " appears in the display window.
To cancel the TIMER, press the TIMER button so
that " " disappears in the display window.
"PLAY" and "REC" indicator flash in
the display window alternately for
about 3 seconds.
"PLAY" indicator : TUNER play only
"REC" indicator : TUNER play and recording
is flashing.
number with PRESET (-/+) buttons and
press SET/CD( [] ).
seconds in the display window and then
disappears.
7