Features - KTI Networks KGS-1260/G Installation Manual

1.2 Features


Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots

All copper ports support auto-negotiation and auto-MDI/MDI-X detection.

Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers.

Full wire speed forwarding

Supports 802.3x flow control for full-duplex and backpressure for half-duplex

Supports SFP with Digital Diagnostic Monitoring (DDM)

Supports redundant power inputs

Provides fiber Optical Power Alarm (OPA) function

Provides Automatic Laser Shutdown (ALS) function

Management:
- HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
- DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4
- IPv6 support, System Syslog, Configuration down/upload, Software upload

Security:
- NAS, 802.1X, MAC-based/Web/CLI authentication
- IP MAC binding, TACACS+, IP source guard

Layer 2:
- QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
- Storm control for UC/MC/BC packets, Static MAC configuration
- IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
- Multiple Spanning Tree - MSTP. RSTP, STP

Auto Multi-Ring (KAMR) Technology:
- Fast failover response time
- Auto recovery when failure is repaired
- Supports up to five redundant rings
- Works with RSTP network

Specific SNMP implementation:
- Private MIB for reading DDM status
- Private MIB for remote boot the device over SNMP
- Private MIB for TFTP firmware update over SNMP
- Private MIB for configuring OPA function
- Private MIB for configuring ALS function
- OPA alarm traps
-7-