KTI Networks KGS-1260/G Installation Manual page 12

C 6.9.3 Damp heat – steady state
C 6.9.3 Humidity
C 6.9.3 Dry heat - storage
C 6.9.3 Cold – storage
IEC 61850-3 Mechanical Test Specifications
IEC 61850-3
C 6.10 Vibration – resonant search
C 6.10 Vibration – endurance
C 6.10 Shock - responds
C 6.10 Shock - withstand
C 6.10 Shock – bump
C 6.10 Seismic
C 6.10 Enclosure protection
IEEE 1613 Test Specifications
IEEE 1613
Clause 4.1
Clause 4.2
Clause 4.3
Clause 5.2
Clause 5.3
Clause 6 / EMC
Clause 6 / EMC
Clause 7 / EMC
Clause 8 / EMC
Test
Test
DC rated control power inputs
Ripple on DC power input
AC rated control power inputs
Dielectric strength
Impulse voltage
1Mhz oscillatory wave
EFT
RS
ESD
+40℃, 95%RH, 48hrs
+25℃95%RH 12hrs/
55 C 95%RH 12hrs, 2 cycles
o
+85℃, 30%RH, 96hrs
-40℃, 96hrs
Specification
Class 2, 1Gn, 1/axis
Class 2, 2Gn, 20/axis
Class 2, 10Gn, 11ms, 3/axis
Class 2, 30Gn, 11ms, 3/axis
Class 2, 20Gn, 16ms, 1000/axis
Class 2, x – 2Gn, y – 1Gn, 10min.
Ingress of solid foreign subjects >=2.5mm
Level
80% 100% Max. DC IN
10%
N/A: No AC input in the device
DC IN vs. LAN ports: 2.8kV
DC IN vs. LAN ports: 1000Vac
DC IN & LAN: +/-2.5kV
DC IN & LAN: +/-4kV
10V/m
+/-15kV Air, +/-8kV Contact
-12-