Table of Contents
Advertisement
2.3 DIN-Rail Mounting
In the product package, a DIN-rail bracket is provided for mounting the switch in an industrial DIN-rail
1 7 1 B
enclosure.
T he steps to mount the switch onto a DIN rail are:
1 7 2 B
1.
Install the mounting bracket onto the switch unit as shown below:
1 2 8 7 B
2.
A ttach bracket to the lower edge of the DIN rail and push the unit upward a little bit until the bracket can
1 2 8 8 B
clamp on the upper edge of the DIN rail.
3.
C lamp the unit to the DIN rail and make sure it is mounted securely.
1 2 8 9 B
-14-
Advertisement
Table of Contents
