Table of Contents
Advertisement
Chapter 3 Demo Waveforms
Demo 2: Phase Modulation Analysis (BPSK)
Overview
The signal is a 100 kHz carrier, phase modulated by a 1 kHz square wave.
The input signal has an amplitude of 500 mV p-p, and is centered about
0 volts. The signal is connected to input 1 of the HP E1740A.
1
Select Setup>Instrument Setup... to view the HP E1740A setup menu.
This is the HP E1740A Setup menu to configure the instrument to
measure the BPSK signal.
2
Click the Cancel button to exit this menu without making changes.
3
Select Setup>Measure/View Setup... .
Getting Started Guide
3-13
Advertisement
Table of Contents
