Table of Contents
Advertisement
Chapter 2 Practice Using the TIA
TIA Tutorial
You can also display the delta marker (marker 2) on a clicked point by
holding the SHIFT key while clicking the right mouse button. The same
information as above is displayed as MRK2> and MRK1to2>. To clear a
marker, hold down the CONTROL key while clicking on the appropriate
mouse button. Both markers may be cleared in one operation by clicking
both mouse buttons together.
NOTE
The cursor position values are the (x,y) position on the graph. The cursor
is not tied to measurement data points.
4
You can magnify or zoom in on a particular portion of the waveform by
defining the area of interest with the cursor and clicking on the Zoom
button. Position the cursor at a positive peak of the sinusoid and click the
left button. Without releasing the button, drag the cursor to the next
Getting Started Guide
2-23
Advertisement
Table of Contents
