Table of Contents
Advertisement
In This Guide
Description of the High Performance Time
Interval Analyzer
The HP E1725C and HP E1740A Time Interval Analyzers provide new
insight into critical timing issues for applications in computer,
communications, and defense industries. The HP E1725C TIA features a
modular architecture that offers both high performance timing
measurements and a customized user-interface, which can be configured
to specific measurement applications. The HP E1740A Time Interval
Analyzer VXI module is the measurement hardware of the system.
The HP E1742A/43A/44A/46A/48A series of analysis software is designed
to "tune" the TIA to specific needs for greater ease-of-use and higher
productivity. The TIA and software provide the following measurement
and analysis features:
•
Graphical user interface implemented in Windows® 3.1 or
Windows® 95
A mouse, or similar pointing device, can be used to set up the TIA,
control operation, and analyze results.
•
Large sequential data capture
Up to 256 thousand single-channel measurements can be acquired in
sequence. This can be useful when studying phenomena which occur
over many measurement samples.
•
Large histogram capacity
Large amounts of data can be collected into a histogram very quickly.
Statistical analysis is enhanced with higher confidence due to large
sample sizes.
•
Continuous edge sampling up to 80 MHz rate
In the HP E1743A and E1744A, every edge can be timed in a pulse
series up to an 80 MHz rate (12.5 ns minimum continuous interval,
3.2 µsec maximum interval). In the HP E1742A, HP E1746A, and
HP E1748A (and optionally the HP E1743A and HP E1744A), every
viii
Getting Started Guide
Advertisement
Table of Contents
