Install The Hp Tia Software - HP E1725C Getting Started Manual

1
2
3
NOTE
Chapter 1 How to Begin
Installing the HP E1742A/43A/44A/46A/48A Analysis Software

Install the HP TIA Software

Insert the HP E1742A/43A/44A/46A/48A disk 1 into the 3.5-inch floppy
drive.
Start Windows.
Open Windows Explorer and double-click on Setup File to install the
software.
The software cannot be installed while another Visual Basic program is
open in Windows. If you see an error message to this effect, close all other
Visual Basic programs to proceed with the installation.
Shortly after double-clicking, you will see the installation window shown
below. If you see a different window, you may have inserted disk 3 by
mistake. (Disk 3 also has a file with the name setup.exe.) Click Cancel
and return to step 1.
This window allows you to modify the directory for the software
installation, or to cancel the installation completely. To cancel the
installation, click Exit Setup or press ALT E.
1-8 Getting Started Guide