Table of Contents
Advertisement
Chapter 2 Practice Using the TIA
TIA Tutorial
3
Select the measurement setup window by clicking on
Setup>Measure/View Setup... .
This window is used to specify the measurement processing
parameters which are inherent in measurement calculations, such as the
number of measurements, the duration of the measurement, the number
of averages, filtering, clock/carrier determination, etc. You will also select
the TIA input channel (1 or 2) which will be used to collect the data for
measurement computations. The actual data acquisition and
processing will be selected and initiated from the Measure menu.
(The HP E1743A/44A/46A/48A dialog boxes will look slightly different
than the HP E1742A shown above.)
2-10
Getting Started Guide
Advertisement
Table of Contents
