Table of Contents
Advertisement
Chapter 3 Demo Waveforms
Demo 1: Voltage-Controlled Oscillator (VCO) Frequency Step Response
and Settling
1
Select Setup>Instrument Setup... to view the HP E1740A setup menu.
2
This is the Instrument Setup menu for the HP E1740A, configured to
measure the VCO signal. The input circuitry for inputs 1 and 2 and the
trigger input, as well as the delay from trigger are specified on this menu.
Click Cancel to close this menu without making changes, and proceed to
the next step.
3
Select Setup>Measure/View Setup... .
3-4
Getting Started Guide
Advertisement
Table of Contents
