Ir Remote Control - SPL Phonitor xe User Manual

IR Remote control

The volume potentiometer can be remotely controlled using any infrared (IR) remote control.
The special feature is that the Phonitor xe learns your remote and not the other way around. You do not need a uni-
versal remote control. Take, for example, the remote control of the CD player. Out of the many buttons there are two
you hardly use if at all. Assign Volume up / Volume down to these two buttons and let the Phonitor xe learn them.
• Press the IR PGM VOLUME button (18)
point. The Power LED now lights up brighter.
• Point your remote control towards the
use to lower the volume. The power LED flashes once per push. Press the same button
repeatedly until the power LED flashes three times within a short interval –
programming this button is then completed.
25
on the rear of the unit until you note the actuation
VU meters (2) and push the button you wish to
I F R B
IR Remote control