Mode Switch; Laterality - SPL Phonitor xe User Manual

MODE switch

By using the MODE switch (6)
control and Mono. In Mono mode, both stereo channels are summed. The mono signal main-
tains the same loudness, because both stereo channels are each reduced by 6 dB.

Laterality

Laterality refers to the deviation of sound perception to either side of the ears. With the
can compensate perceived volume differences between channels that may be due to a hearing impairment.
This control differs from conventional balance controls. If one channel is attenuated, the other one is increased at
the same time. This means that, e.g. when hard left, the level of the left channel increases
by 2.25 dB while the right channel is attenuated by 2.25 dB.
This control has a narrower range than conventional balance controls. Its resolution is very
fine, which means it can be peciseley adjusted.
Set the MODE switch to LATERALITY to control the laterality (see above).
23
you can switch the audio signal to Stereo, Stereo with Laterality
RCA
XLR
Phonitor xe
Off
USB Coax
RCA Optical
XLR AES
Mono
VOLTAiR
120V DC Audio Rail
I F R B
MATRIX
MODE switch
USB Coax
Optical
AES
Stereo
Mono
MODE
VOLTAiR
120V DC Audio Rail
Laterality control (10)
On
MATRIX
Stereo
MODE
you