Easy Maintenance & Cleaning - Sunrise Medical JAY Lite User Instruction Manual

E NGLI SH
EASY MAINTENANCE & CLEANING
Monthly cleaning and regular maintenance may help extend the
life of your cushion. During cleaning, component inspection is
recommended.
Check the cover for tears and excessive wear and / or any other
abnormalities.
Check the foam base to ensure foam consistency. Check
the pelvic loading area insert to ensure reticulated foam
consistency.
To clean cover
1. Remove the cover from the foam base and turn inside out.
2. Machine wash in warm water and drip or tumble dry on low
heat.
3. No ironing required.
NOTE: Do not dry clean covers or use industrial washers and
dryers to clean cover. Do not steam autoclave. Do not bleach.
To refit cover after washing, fit cover back over foam base.
Ensure the back of the cover matches up to the back of the
foam base.
NOTE: If utilized in an institutional setting, write the resident's
name with a permanent marker on the content label of the
covers. This will help to ensure the return of the covers after
washing.
To clean PLA (pelvic loading area) insert
1. Remove the insert from the foam base.
2. It is not necessary to remove the cover from the insert
to wash it. We recommend it to be washed in the cover.
Before washing, enclose the insert (with cover installed) in
a mesh laundry bag to protect the Velcro hooks from the
washing machine agitator and prevent tangling with other
items.
3. Machine wash in warm water and drip or tumble dry on low
heat.
Do not wash a damaged insert.
To clean foam base
1. Remove the cover from the foam base. Wipe lightly with a
damp cloth.
2. Wipe off the base with a clean cloth. Let it completely air-
dry before reassembly.
3. Reinstall the cover with the reticulated foam pad over foam
base. Ensure the back of the cover matches up to the back
of the foam base.
NOTE:
• Consult table on next page for further approved cleaning
methods
112803
Laundry Care Symbols
NOTE: 70°C is the maximum temperature.
These instructions apply to the cover only.
REASSEMBLING THE JAY LITE CUSHION AFTER
CLEANING
Follow cleaning and maintenance instructions as described in
"Easy Maintenance and Cleaning" then reassemble as follows:
Place the PLA insert on the foam base, fixing it to the base
through the existing Velcro strips, and then introduce the base
with PLA insert into the outer cover. Ensure that the zipper is at
the rear of the foam base (the part number tag should be to the
rear of the foam base) where the pelvic loading area is located.
JAY LITE CUSHION WARRANTY
Every Jay Lite cushion is guaranteed to be free from defects
in materials and workmanship for a period of 24 months
from the date of purchase provided normal use. Should a
defect in materials or workmanship occur within 24 months
from the original date of purchase, Sunrise Medical will, at its
option, repair or replace it without charge. This warranty does
not apply to punctures, tears or burns, nor to the cushion's
removable cover.
The removable cover is guaranteed to be free from defects in
materials and workmanship for a period of six (6) months from
the date of purchase, provided normal use. Should a defect in
materials or workmanship occur within six (6) months from the
original date of purchase, Sunrise Medical will, at its option,
repair or replace it without charge.
Claims and repairs should be processed through the nearest
authorized supplier. Except for express warranties made
herein, all other warranties, including implied warranties of
merchantability and warranties of fitness for a particular
purpose are excluded.
There is no implied warranty beyond what is contained herein.
Remedies for breach of express warranties herein are limited to
repair or replacement of the goods. In no event shall damages
for breach of any warranty include any consequential damages
or exceed the cost of non-conforming goods sold.
This does not affect your statutory rights.
4
JAY LIT E
Machine wash in hot water (70° C)
Only non-chlorine bleach,
when needed
Drip dry
Do not iron
Do not dry clean
JAY Lite Rev.E