Quick Start - Philips Lytemode 6-Button Remote Station User Manual

Quick Start

To get the 6-Button Remote Station up and running quickly, use the
following checklist:
Step 1. Install unit (refer to "Installation" on page 6).
Step 2. Connect to Lytemode ILS Network (refer to "Setting ILS
Network ID" on page 7).
Step 3. Set the mode (refer to "Mode" on page 9).
The unit should now be ready for operation.
Notes:
• If the unit was set up as a Remote, then a Lytemode Master
must be set to the same ID for the unit to function properly.
• If the unit was set up as a Global Remote, then a Lytemode
Master must be set up to allow Global Remotes - matching
the unit's ID - in order function properly.
4
Quick Start