Factory Defaults and Troubleshooting
Resetting Factory Defaults
To set the unit back to its Factory Defaults, do the following:
ON
A
B
C
D
OFF
ON
A
B
C
D
OFF
Step 1. Press and hold ON and OFF for 3 or more
seconds. (All LEDs will start to blink.)
Step 2. While still holding ON/OFF buttons, also
press and hold A. (After another 3
seconds, unit will reset back to its Factory
Defaults.)
Factory Defaults are as follows:
• Unit Mode = 0 (Remote)
• Unit ID = 0 (Disabled)
• LED intensity = 75%
• IR = Disabled
6-Button Remote Station User's Guide
17