Advertisement
Instructions for Special Edition Kit #JM-66
Square the corners
of the window, door, and stair holes with a utility knife - each
cutout has a rounded corner left over from the tool that made it. Make two cuts in
each corner from the outside (one from each direction), then cut from each direc-
tion on the inside to cut away the rounding in the corner so the window, door, or
stairs will fit.
A Double-Cut Coarse file is
easier for many people to use
when squaring the corners.
Make several strokes from each
direction in each corner and test
the Window or Door to see how
it fits.
Pre-Assembly: Assemble the Foundation before painting (see pages 8& 9)
Foundation Assembly:
1. Glue and tape together a Lilliput
Foundation Set (
1
/
" tall), a Farmhouse
2
Foundation (
3
/
" tall) or the Alison
4
Foundation (1
1
/
" tall, made up of a
4
1
/
" tall Foundation Set plus a
2
Foundation Set) depending on what
house you have.
2. Without glue, put the Base Floor
on the Foundation set lined up on the
edges to check that the Foundation set is
square while the glue dries.
A: Getting Started:
Do these things before the house assembly
3
/
" tall
4
Getting Started (A) page 4
JM33
3
/
" tall Foundation next to a Farmhouse Jr.
4
Straight
and
square
Advertisement
