Setting The Number Of Copies (Repeated Copying) - Ricoh 8700W Operating Instructions Manual

BASIC

Setting the Number of Copies (Repeated Copying)

Repeated copying means to make two or more copies of one original. This
function allows you to make up to 10 copies in the size of 1,200 × 914 mm, 49"
× 36" to B5 K.
S In repeated copying, the image might be copied slantly depending on the
original size, type, and condition (e.g., curl, wave). In such a case, make
one copy at a time.
S You cannot use the repeated copy function in the following cases:
• When using the carrier sheet (option)
• When setting an original in the rear table
See page 4, "Recommended Originals"
1
Set the original trays with their
edges facing down.
2
Press the
specify the number of copies.
When you press the Clear/
Stop key, the number of
copies returns to "1".
8 COPYING
and keys to