IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
Waved Copies
Cause
The fusing temperature is
not appropriate.
The paper texture flow di-
rection is not appropriate.
Inappropriate copy paper is
used.
Creased Copies
Cause
The copy paper is damp.
Inappropriate paper type/
roll width is specified.
Inappropriate copy paper is
used.
32 WHAT TO DO IF SOMETHING GOES WRONG
Corrective action
Switch the fusing temperature according to the
paper type. → See page 7.
Use paper of the appropriate texture flow
direction.
Use only recommended paper. → See page 5.
Corrective action
See "Blurred Copies." → See page 30.
Set the paper type/roll width suitable for the roll
paper to be used. → See page 22.
Use only recommended paper. → See page 5.