Ricoh 8700W Operating Instructions Manual page 20

2
Press the + and - keys to
specify a leading edge margin.
Press the + key to increase
the margin width and - to
decrease the width.
If you enter a wrong value,
press the Clear/Stop key and
reenter a correct value.
3
Press the Edge Margin key.
The specified value goes on. The
"Trailing Edge" indicator flashes
when the "Synchro Cut" mode is
selected.
You can start copying here
when the "Manual Feed,"
"Preset Cut," or "Variable
Cut" mode is selected.
4
Press the + and - keys to
specify a trailing edge margin.
If you enter a wrong value,
press the Clear/Stop key and
reenter a correct value.
5
Press the Edge Margin key.
The specified value goes on.
Both margins are set.
BASIC
COPYING 13