Subscribe to Our Youtube Channel
Related Manuals for Monoprice 41841
Summary of Contents for Monoprice 41841
- Page 1 Indoor/Outdoor Weather Resistant 70V/100V/8-Ohm Pendant Speaker P/N 41841, 41842, 41843 User's Manual...
-
Page 2: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. Turn off and unplug all equipment prior to making •... -
Page 3: Customer Service
FEATURES 4" (41841), 5.25" (41842), or 6.5" (41843) polypropylene • woofer 0.75" (41841) or 1" (41842 and 41843) silk dome tweeter • Four 70V and four 100V transformer taps, as well as • NC and 8Ω taps 20 watts (41841), 30 watts (41842), or 40 watts (41843) •... -
Page 4: Package Contents
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x Pendant Speaker 1x Top Cover 1x Eye Bolt and Nut... -
Page 5: Speaker Wiring
ohm impedance, or in parallel, which results in an overall 4- ohm impedance. In the first case, the 16-ohms impedance effectively halves the output power of your amplifier, resulting in lower overall volume levels. In the latter case, the 4-ohms impedance means that your amplifier will have to work harder and must be rated as stable at 4 ohms. -
Page 6: Installation
Repeat for each additional speaker in the array. For the 4" (41841) model, connect the output speaker wires to the same terminal as the input wires, as shown in the diagram below. For the 5.25" (41842) and 6.5" (41843) models, an additional terminal is provided for connecting the output wires to the next speaker in the array, as shown in the diagram below. - Page 7 Before making each speaker wire connection, strip about 1/4" insulation from each end of each conductor, then twist the strands to prevent stray strands from causing a short. Power off and unplug all equipment to be connected. 2. Determine how many speakers will be in the left and right channel speaker arrays.
- Page 8 value, depending on the output voltage by your amplifier. For example, using the values in the previous examples and using the 41843 6.5" model, set the tap dial to the 10W position, which is the 3rd position for 70V systems or 2nd position for 100V systems.
-
Page 9: Specifications
Congratulations, your constant voltage speaker system is installed and ready for use! SPECIFICATIONS Model 41841 Woofer 4" polypropylene cone Tweeter 0.75" silk dome Maximum RMS Power... - Page 10 Model 41842 Woofer 5.25" polypropylene cone Tweeter 1" silk dome Maximum RMS Power 30 watts Frequency Response 110Hz ~ 20kHz Nominal Impedance 8Ω Sensitivity (1m/1W) 84dB 1.87W, 3.75W, 7.5W, 15W, NC, 70V Taps 8Ω 100V Taps 3.75W, 7.5W, 15W, 30W, NC, 8Ω IP Level IP66 Dimensions...
-
Page 11: Technical Support
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. - Page 12 Notice for Industry Canada This Class B digital apparatus complies with Canadian ICES- 003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
Need help?
Do you have a question about the 41841 and is the answer not in the manual?
Questions and answers